Hot Tar Asphalt Tack Oil Spray Wand

Larger image here

SW-1	Hot Asphalt Tack Oil Spray Wand Complete Assembly (less hose)		305.00

Repair an Asphalt Driveway with this Hot Tack Oil Spray Wand. The Steel Sprayer Pipe and Hot Handle Assembly is Made In America. The Spray Wand with Hot Handle is made from high quality components. Overall length is 5 ft. 7 Gallons per minute. Viton Seal O'Ring Valve. 150 PSI rated. Up to 400 degree valve packing. Steel Pipe components and Brass Spray Nozzle.
High Temperature Spray Hose for 1/2" Hot Tar Asphalt Tack Oil or the Teflon Tubed Stainless Steel Cover Hose (not shown) are optional and available in any length. Air is used to blow out remaining Hot Tar Emulsion Materials after use. Due to intense high temperatures, Quick Coupler disconnects seals are not suitable with this devise.
Important Note: Sprayer not designed to exceed 400°F degrees Hot Materials Emulsion usage. Always wear protective face shields, gloves and clothing when handling hot emulsion material devises. Also, be sure to blow out the wand and hose assemblies with high pressure air after each use. Be sure to complete the maintenance prior to emulsions cool down.

Additional usage for Hot Tar Ashpalt Oil Spray Wad: Web videos on Oil Spill Clean Up with Wax.
[ Link ].

1/2" x 20 ft Asphalt Tack Oil Hose

Description

Price

Add to Cart

SW-249-H 20'
High Temperature Tack Oil Spray Hose
1/2 " x 20 ft
1/2" Male Pipe Swivel Both Ends (connects to Spray Wand)
M2T® SAE 100R2 Flame Resistant MSHA 2G-11C
-40°F to +212°F | 4,300 PSI
Inner Tube Nitrile | Two Braids Steel Wire
Petroleum Base Hydraulic Fluids and Lubricating Oils

M2T Flame Resistance Hose 55kb

178.00

Hot Asphalt Tack Oil Spray Tips and Adapters

Brass

3750604C
RC3F2F

Replacement Reducer Adapter.
3/8" (F) to 1/4" (F) Reducer
Larger Image

5.00

Brass

3751208C
RA6F4M

Adapter that connects 1/2" (F) Pipe End of Spray Wand to 3/4" (M) Pipe Hose Fitting

11.00

Brass

3060404C
306-0404

Replacement Elbow Adapter.
1/4" (F) to 1/4" (M) elbow
Larger Image

5.00

Steel

NZ1504

Replacement Spray Tip
1/4" Male NPT Inlet
15° Spray Angle
Size 4 | Carbon Steel
Larger Image | More Details

16.00

Steel

NZ2504

Replacement Spray Tip
1/4" Male NPT Inlet
25° Spray Angle
Size 4 | Carbon Steel
Larger Image | More Details

16.00

Steel

NZ4004

Replacement Spray Tip
1/4" Male NPT Inlet
40° Spray Angle
Size 4 | Carbon Steel
Larger Image | More Details

16.00

Brass

NZ8040S

Replacement Spray Tip
1/4" Male NPT Inlet
80° Spray Angle
Size 4 | Brass
Larger Image | More Details

12.00

Hot Asphalt Tack Oil Spray Tip Manifolds

D3408

Spray Tip 3 in 1 Manifold
Inlet: 1/2" Female Pipe
Outlet: 1/4" Female Pipe
Material: Aluminum
More Details

21.00

Hot Asphalt Tack Oil Shut Off Valves

FBV50

Brass Ball Valve
1/2" Female Pipe Both Ends
Non-Domestic
More Details

19.00

SSBV50

Optional Stainless Steel Ball Valve
1/2" Female Pipe Both Ends
More Details

41.00

Quick Coupler Disconnects

Quick Coupler ST Series Straight Through Brass Coupler 1/2 Body to 1/2 Female Pipe

BST-4

Quick Coupler ST Series
Body: Brass
Female 1/2" Body
Female 1/2" Pipe Thread
More Details

15.00

BST-4M

Quick Coupler ST Series
Body: Brass
Female 1/2" Body
Male 1/2" Pipe Thread
More Details

16.00

BST-N4

Quick Coupler Nipple ST Series
Body: Brass
Male 1/2" Body
Female 1/2" Pipe Thread
More Details

8.00

BST-N4M

Quick Coupler Nipple ST Series
Body: Brass
Male 1/2" Body
Male 1/2" Pipe Thread
More Details

6.00

Melting Temperatures Guide.

Copyright Terms Contact Us
Prices and Tariffs are subject to change without notice Minimum Order U.S.A. and Canada: $135 (US) Minimum Order International: $250 (US) Terms and Conditions Privacy Notice

Copyright © 2003 - 2022 All Rights Reserved: Construction And Rigging Supply, Inc. eMaterialhandling.com 1427 Los Angeles Avenue, Ventura, CA 93004 Contact us: 805-647-4792 Office \| 805-256-6477 Fax