Used For Spreading Hot Wax Paraffin Emulsions Materials on Oil Sprills. The Hot Wax desolves the oil into a thick flouting paste that can then be easily raked away and removed for the liquid surfase. The Steel Sprayer Pipe and Hot Handle Assembly is Made In America. The Spray Wand with Hot Handle is made from high quality components. Overall length is 5 ft.  7 Gallons per minute.  Viton Seal O'Ring Valve.  150 PSI rated. Up to 400 degree valve packing. Steel Pipe components and Brass Spray Nozzle (1/4" 8010).  High Temperature Hose [shown below] or Teflon Tubed Stainless Steel Hose for Hot Paraffin Wax [not shown] are optional and available in any length.  The Air Hose is used to blow out remaining Hot Wax Emulsion Materials after use. Due to intense high temperatures. Air Quick Coupler disconnects seals are not suitable with this devise.  
Important Note: Sprayer not designed to exceed 400°F degrees Hot Materials Emulsion usage.  Always wear protective face shields, gloves and clothing when handling hot emulsion material devises.  Also, be sure to blow out the wand and hose assemblies with high pressure air after each use. Be sure to complete the maintenance prior to emulsions cool down.